is common strength shipbuilding plate which is mainly used for built hull of vessels,ship body construction.Normally when rolling,Air rolled and Control Rolled is ok for ship plate CCS Grade B with the thickness equal and belows 40 Millimeters,and for thickness above 40mm,the heat treatment shall be Normalised or TMCP.
| Si max. | Mn min. | ||||||
|
0.21 |
0.35 |
0.80 |
0.035 |
0.035 |
0.35 | 0.30 |
0.30 |
| Yield Strength (MPa) min. | Elongation min. % | |
| 235 | 400-520 | 22 |
, including bulk carriers, oil tankers, container ships, and general cargo vessels.
ensure structural integrity under heavy loads, strong waves, and dynamic marine conditions.
, CCS Grade B ship plates maintain stability and load-bearing capacity while resisting deformation.
.
low-temperature impact makes them suitable for deep-sea oil and gas exploration projects.
, to provide additional strength and enhance the overall safety of ships.
CCS Grade B Shipbuilding steel plate,CCS Grade B Ship Steel plate ,CCS Grade B Marine Steel plate , CCS Grade B Steel Plate .
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
info@gneesteels.com. We will be very happy to serve you.



|
CCS Grade AH32 |
CCS Grade DH32 |
CCS Grade EH32 |
CCS Grade FH32 |
|
|
CCS Grade AH36 |
CCS Grade DH36 |
CCS Grade EH36 |
CCS Grade FH36 |
|
|
CCS Grade AH40 |
CCS Grade DH40 |
CCS Grade EH40 |
CCS Grade FH40 |
|
|
CCS Grade AQ43 |
CCS Grade DQ43 |
CCS Grade EQ43 |
CCS Grade FQ43 |
|
|
CCS Grade AQ47 |
CCS Grade DQ47 |
CCS Grade EQ47 |
CCS Grade FQ47 |
|
|
CCS Grade AQ51 |
CCS Grade DQ51 |
CCS Grade EQ51 |
CCS Grade FQ51 |
|
|
CCS Grade AQ56 |
CCS Grade DQ56 |
CCS Grade EQ56 |
CCS Grade FQ56 |
|
|
CCS Grade AQ63 |
CCS Grade DQ63 |
CCS Grade EQ63 |
CCS Grade FQ63 |
|
|
CCS Grade AQ70 |
CCS Grade DQ70 |
CCS Grade EQ70 |
CCS Grade FQ70 |
|




